Recover Data Files, Unerase Files

10 Responses

Comments(10)Trackbacks(0)

1. 
   Legified

   …. my cable is different. instead of 4 insert things, theres 3 ( 1 connected to the CD drive, then to the HDD, and then to that motherboard or w/e its called….) help???

   November 30, 2009 10:10 pm | #1
2. 
   Chrislovesgemzyy

   stupid dick

   November 30, 2009 10:32 pm | #2
3. 
   bowthug12

   hey can i switch my desktop hard drive with my ps3 hard drive basiclly i want my desktop hard drive in my ps3 and my ps3 in my desktop

   November 30, 2009 11:28 pm | #3
4. 
   garfieldcisco

   tks

   December 1, 2009 12:26 am | #4
5. 
   cooltooth1

   looks like a rats nest

   December 1, 2009 12:49 am | #5
6. 
   volican

   mama yo the best

   December 1, 2009 1:19 am | #6
7. 
   waya121

   ty you help computer idiots like me. But can you tell how where to put the pin if the HD say “off” under slave?

   December 1, 2009 2:11 am | #7
8. 
   fignon

   Rebooted PC and it starts ok both drives are present under disk drives in system devices but under my computer only C drive is presentWent into BIOS and only drive recognised is the original Drive which is now secondary Master, there is no primary master, or any slaves listed in the Bios, any ideas?

   December 1, 2009 2:37 am | #8
9. 
   fignon

   I wanted to install a new HD as a slave, its same HD as existing but 80GBI disconnected HD1 cable from existing HD and changed the jumper to Master, reconnected to “Drive 0″ on other end of cable and attached the slave to Drive 1 slot, ensuring that jumper settings were set to Slave

   December 1, 2009 2:52 am | #9
10. 
    fignon

    Maybe u can help me Current set upDell Dimension 3000 “windows xp SP2″W Digital IDE 40GB conncted to a cable, one end labeled sys, other HD1 The other side of the cable (other side of mother board) was connected to optical drive, this side of cable had 2 ports, for drive 0 and drive 1, i disconned the optical drive

    December 1, 2009 3:49 am | #10